Motorcycling Australia

2013 MANUAL OF MOTORCYCLE SPORT
APPENDIX 1 HELMET APPROVALS & FITTING
30.1.1
APPROVAL LABELS FOR HELMETS
30.1.1.1
Helmets must carry one of the following approval labels, as listed in Rule 01.70 of the FIM Technical Rules.
a)
Europe
ECE 22 - 05 ‘P’,‘NP’ or ‘J’ [Label is on retention system or comfort interior]
b)
USA
DOT Federal Standard No 218 / SNELL M2005, M2010 [Label affixed inside the helmet]
c)
Japan
JIS T 8133: 2007 [Label affixed inside the helmet]
d)
Australia
Standards Association of Australia AS1698
30.1.2
International Helmet Standards
Refer also www.fim.ch
30.1.2.1
ECE 22-05 ‘P’, ‘NP’ or ‘J’ [EUROPE]
The ECE mark consists of a circle surrounding the letter E followed by the distinguishing number of the country which has granted approval, as follows:
E1   Germany
E6   Belgium
E11 United Kingdom
E16 Norway
E21 Portugal
E26 Slovenia
E31 Bosnia Herzegovinia
E36 Not Assigned
E45 Australia
E2   France
E7   Hungary
E12 Austria
E17 Finland
E22 Russian Federation
E27 Slovakia
E32 Latvia
E37 Turkey
E46 Ukraine
E3   Italy
E8   Czech Republic
E13 Luxembourg
E18 Denmark
E23 Greece
E28 Bielo Russia
E33 Not Assigned
E40 Macedonia
E47 South Africa
E4   Netherlands
E9   Spain
E14 Switzerland
E19 Roumania
E24 Ireland
E29 Estonia
E34 Bulgaria
E43 Japan
E48 New Zealand
E5   Sweden
E10 Yugoslavia
E15 Not Assigned
E20 Poland
E25 Croatia
E30 Not Assigned
E35 Not Assigned
E44 Not Assigned
E49 Not Assigned
Below the letter E the approval number should always begin with 05. Below the approval number is the serial production number






AS1698
Marks